Isolated Ground Stud M6 Feed Through
Power Distribution
The nuts and bolts of any electrical system are the connectors which keep the current flowing.
Blue Sea Systems connectors reduce heat and improve efficiency and reliability in a low voltage electrical system. The features below make Blue Sea Systems connectors stand out from the others.
- Tin plated copper bus provides maximum conductivity and corrosion resistance
- Insert molded stainless steel studs eliminates the need fro securing nut and allows high torquing for excellent electrical contact.
- UL 94-40 rated base material resists high heat.
- Stainless steel split ring lock washers and captive star-type lock washers keep connections tight in high vibration environments.
- Optional insulating covers meet ABYC and USCG insulation requirements.
Terminal Blocks
Blue Sea Terminal Blocks - 20A
Blue Sea Terminal Blocks are fully insulated independent blocks to isolate circuits.
- Closed back design completely insulates power from the mounting surface
- Each screw pair is one isolated circuit
- Jumpers allow creation of common circuits
- Base Material - Phenolic
- Bus Material - Nickel-Plated Brass
| P/N | 2402 | 2404 | 2406 | 2408 | 2410 |
|---|---|---|---|---|---|
| Circuits | 2 | 4 | 6 | 8 | 10 |
| Length | 1.43in (36.32 mm) | 2.17in (55.12 mm) | 2.91in (73.91 mm) | 3.66in (92.96 mm) | 4.41in (112.01 mm) |
| Maximum Voltage | 300V AC/DC | ||||
| Continuous Rating | 20A | ||||
| Base Material | UL 94 V0, PC | ||||
| Bus Material | Nickel-Plated Brass | ||||
| Mounting Screw | #6 [M3.5] | ||||
| Screw Material | Stainless Steel | ||||
| Screw Terminal Torque | 7 in-lb (0.79 Nm) | ||||
| Terminal Screws | M3.5 | ||||
| Wire Terminal Size | #6 [M3] | ||||
| Weight | 0.05lb (0.02 kg) | 0.07lb (0.03 kg) | 0.08lb (0.04 kg) | 0.10lb (0.05 kg) | 0.13lb (0.06 kg) |
| Blue Sea Terminal Blocks - 20A | |||
| BSS2402 | Term.Block 2Circ. 20A | $6.99 |  |
| BSS2404 | Term.Block 4Circ. 20A | $8.99 | |
| BSS2406 | Term.Block 6Circ. 20A | $11.99 | |
| BSS2408 | Term.Block 8Circ. 20A | $13.99 | |
| BSS2410 | Term.Block 10Circ. 20A | $18.99 | |
Blue Sea Terminal Blocks - 30A
Blue Sea Terminal Blocks are fully insulated independent blocks to isolate circuits.
- Closed back design completely insulates power from the mounting surface
- Each screw pair is one isolated circuit
- Jumpers allow creation of common circuits
- Base Material - Phenolic
- Bus Material - Nickel-Plated Brass
| P/N | 2502 | 2504 | 2506 | 2508 | 2510 | 2512 |
|---|---|---|---|---|---|---|
| Circuits | 2 | 4 | 6 | 8 | 10 | 12 |
| Length | 2.13in (54.1 mm) | 3.25in (82.55 mm) | 4.38in (111.25 mm) | 5.50in (139.7 mm) | 6.63in (168.4 mm) | 7.75in (196.85 mm) |
| Maximum Voltage | 600V AC/DC | |||||
| Continuous Rating | 30A | |||||
| Base Material | UL 94 V0, PC | |||||
| Bus Material | Nickel-Plated Brass | |||||
| Mounting Screw | #10 [M5] | |||||
| Screw Material | Stainless Steel | |||||
| Screw Terminal Torque | 10 in-lb (1.13 Nm) | |||||
| Terminal Screws | M4 | |||||
| Wire Terminal Size | #8 [M4] | |||||
| Weight | 0.11lb (0.05 kg) | 0.17lb (0.08 kg) | 0.21lb (0.1 kg) | 0.27lb (0.12 kg) | 0.33lb (0.15 kg) | 0.44lb (0.2 kg) |
| Blue Sea Terminal Blocks - 30A | |||
| BSS2502 | Term.Block 2Circ. 30A | $9.99 | |
| BSS2504 | Term.Block 4Circ. 30A | $11.99 | |
| BSS2506 | Term.Block 6Circ. 30A | $15.99 | |
| BSS2508 | Term.Block 8Circ. 30A | $18.99 | |
| BSS2510 | Term.Block 10Circ. 30A | $20.99 | |
| BSS2512 | Term.Block 12Circ 30A | $23.99 | |
Blue Sea Terminal Blocks - 65A
Blue Sea Terminal Blocks are fully insulated independent blocks to isolate circuits.
- Closed back design completely insulates power from the mounting surface
- Each screw pair is one isolated circuit
- Jumpers allow creation of common circuits
- Base Material - Phenolic
- Bus Material - Nickel-Plated Brass
| P/N | 2602 | 2604 | 2606 | 2608 | 2610 |
|---|---|---|---|---|---|
| Circuits | 2 | 4 | 6 | 8 | 10 |
| Length | 2.51in (63.75 mm) | 3.89in (98.81 mm) | 5.26in (133.6 mm) | 6.63in (168.4 mm) | 8.01in (203.45 mm) |
| Maximum Voltage | 600V AC/DC | ||||
| Continuous Rating | 65A | ||||
| Base Material | UL 94 V0, PC | ||||
| Bus Material | Nickel-Plated Brass | ||||
| Mounting Screw | #10 [M5] | ||||
| Screw Material | Stainless Steel | ||||
| Screw Terminal Torque | 17.5 in-lb (1.98 Nm) | ||||
| Terminal Screws | M5 | ||||
| Wire Terminal Size | #10 [M5] | ||||
| Weight | 0.15lb (0.07 kg) | 0.27lb (0.12 kg) | 0.34lb (0.15 kg) | 0.43lb (0.2 kg) | 0.52lb (0.24 kg) |
| Blue Sea Terminal Blocks - 65A | |||
| BSS2602 | Term.Block 2Circ. 65A | $16.99 | |
| BSS2604 | Term.Block 4Circ. 65A | $22.99 | |
| BSS2606 | Term.Block 6Circ. 65A | $37.99 | |
| BSS2608 | Term.Block 8Circ. 65A | $43.99 | |
| BSS2610 | Term.Block 10Circ. 65A | $49.99 | |
Blue Sea Terminal Block Jumpers
Combines independent circuits on a Terminal Block (above) and ST-Blade Fuse Blocks P/N 5035 and 5037
- Jumpers allow creation of common circuits on independent connectors
- Continuous Amperage equivalent to matching block
- Base Material - Nickel-Plated Brass
- 5 x Jumpers per Pack
| Blue Sea Terminal Block Jumpers | |||
| BSS9216 | Term.Block Jumpers 65A | $6.99 | |
| BSS9217 | Term.Block Jumpers 30A | $6.99 | |
| BSS9218 | Term.Block Jumpers 20A | $6.99 | |
Blue Sea BusBars
Blue Sea Battery Terminal Mount 100A BusBar
Combines 2 buses on one block
- Easily add positive and negative busbars directly to a threaded-post battery terminal
- Tin-plated pure electrical copper for maximum conductivity
- Insulating covers meet ABYC/USCG insulation requirements
- Screw terminals for securing wires
- Includes four 16-14 AWG and four 12-10 AWG Nylon insulated ring terminals
| p/n | 2430 |
|---|---|
| Maximum Voltage | 32V DC |
| Continuous Rating | 100A DC |
| Bus Material | Tin-Plated Copper C11000 |
| Mounting Hole | Clearance for 3/8" [M10] stud |
| Screw Terminal Type | #8-32 Screws with Captive Star Lock washer |
| Weight | 0.25lb (0.11 kg) |
| Blue Sea Battery Terminal Mount 100A BusBar | |||
| BSS2340 | Terminal Mount BusBar | $42.99 | |
Blue Sea Water Resistant 100A BusBar
Provides secure water-resistant bussing for harsh environments.
- Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools.
- Accepts a wide range of wire sizes
- Includes 3 wire plugs to maintain water-resistant rating if less than 4 wires are used
- Nests with other Water-Resistant 100A Common BusBars and ST-Blade Water-Resistant Fuse Block for space saving wiring
- Ideal for positive distribution and for the collection of negative or AC ground circuits
- 2356100 meets ABYC/USCG insulation requirements
- Tin-plated copper busses and fuse clips
- Includes four write-on circuit labels
- Small format standard and custom labels available
| p/n | 2356 |
|---|---|
| Cover | YES |
| Maximum Voltage | 300V AC |
| Continuous Rating | 100A AC |
| Terminal Stud | 1 x #10-32 |
| Bus Material | Tin-Plated Copper C11000 |
| Mounting Hole | Accepts 1/4" (6mm) Screws |
| Terminal Screws | 4 x #8-32 |
| Wire Size | (1) 8 AWG to 4 AWG - Input |
| Blue Sea Water Resistant 100A BusBar | |||
| BSS2356 | 100A IP66 BusBar | $59.99 | |
Blue Sea Common 100A MiniBus BusBars
Provides convenient busing for limited space applications
- Great for limited space applications
- Base Material - Reinforced Polycarbonate
- Bus Material - Tin-Plated Copper CDA 110 / UNS 11000
- Cover Material - Clear Polycarbonate
- CE Certified
| p/n | 2304 | 2305 | 2314 | 2315 |
|---|---|---|---|---|
| Maximum Voltage | 48V DC / 300V AC | |||
| Continuous Rating | 100A DC / AC | |||
| Number of Terminal Studs | 2 | 4 | 2 | 4 |
| Number of Screw Terminals | 5 | 0 | 5 | 0 |
| Terminal Type | #10-32 Stud | #10-32 Stud | #10-32 Stud | #10-32 Stud |
| Cover | No | Yes | ||
| Base Material | UL 94-V0 Rated, Glass Reinforced Thermoplastics | |||
| Bus Material | Tin-Plated Copper CDA 110/ UNS11000 | |||
| Cover Material | N/A | Clear Polycarbonate | ||
| Screw Terminal Torque | 15 in-lb (1.69 Nm) | N/A | 15 in-lb (1.69 Nm) | N/A |
| Stud Terminal Torque | 18 in-lb (2.03 Nm) | |||
| Weight | 0.16lb (0.07 kg) | 0.18lb (0.08 kg) | ||
| Blue Sea Common 100A MiniBus BusBars | |||
| BSS2304 | MiniBus BusBar 5x#8-32 | $24.99 | |
| BSS2305 | MiniBus BusBar 4x10-32 | $27.99 | |
| BSS2314 | MiniBus BusBar w/Cover | $29.99 | |
| BSS2315 | MiniBus BusBar w/Cover | $33.99 | |
| BSS2713 | Cover 2304 & 2305 | $8.99 | |
Blue Sea DualBus 100A Common BusBars
Combines 2 buses on one block
- Combines Negative and Positive busses for DC Systems and Neutral and Ground Buses for AC Systems
- Base Material ABS
- Bus Material Tin-Plated Copper CDA 110 / UNS 11000
- CE Certified
| p/n | 2701 | 2702 |
|---|---|---|
| Maximum Voltage | 48V DC / 300V AC | |
| Continuous Rating | 100A DC / AC | |
| Number of Screw Terminals | 5 | 10 |
| Terminal Type | #8-32 Screw | |
| Cover | No | |
| Base Material | UL 94-V0 Rated, Glass Reinforced Thermoplastics | |
| Bus Material | Tin-Plated Copper CDA 110/ UNS11000 | |
| Cover Material | N/A | |
| Screw Terminal Torque | 15 in-lb (1.69 Nm) | |
| Weight | 0.21lb (0.1 kg) | 0.30lb (0.14 kg) |
| Blue Sea DualBus 100A Common BusBars | |||
| BSS2701 | DualBus 100A 5x#8-32 | $32.99 | |
| BSS2702 | DualBus 100A 10x#8-32 | $41.99 | |
| BSS2709 | DualBus Insul. Cover | $20.99 | |
| BSS2710 | DualBus Insul. Cover | $23.99 | |
Blue Sea Common 150A BusBars
Insert-moulded Stainless Steel stud eliminates the need for securing nut and allows high torquing for excellent electrical contact.
- The industry standard busbar for positive distribution
- The industry standard busbar for the collection of negative or AC ground circuits
- Once piece serrated flange nut ensures correct and secure connections
- Base Material - Reinforced Polycarbonate
- Bus Material - Tin-Plated Copper CDA 110 / UNS 11000
- Cover Material - Clear Polycarbonate
- CE Certified
| p/n | 2300 | 2301 | 2302 | 2303 | 2307 |
|---|---|---|---|---|---|
| Maximum Voltage | 48V DC / 300V AC | ||||
| Continuous Rating | 150A DC / 130A AC | ||||
| Number of Terminal Studs | 2 | 2 | 2 | 4 | 4 |
| Number of Screw Terminals | 10 | 10 | 20 | 0 | 0 |
| Terminal Type | 1/4" Stud | 1/4" Stud | 1/4" Stud | ||
| Cover | Yes | No | Yes | ||
| Base Material | UL 94-V0 Rated, Glass Reinforced Thermoplastics | ||||
| Bus Material | Tin-Plated Copper CDA 110/ UNS11000 | ||||
| Cover Material | Clear Polycarbonate | N/A | Clear Polycarbonate | N/A | Clear Polycarbonate |
| Screw Terminal Torque | 15 in-lb (1.69 Nm) | ||||
| Stud Terminal Torque | 60 in-lb (6.78 Nm) | ||||
| Weight | 0.37lb (0.17 kg) | 0.34lb (0.15 kg) | 0.53lb (0.24 kg) | 0.35lb (0.16 kg) | 0.39lb (0.18 kg) |
| Blue Sea Common 150A BusBar | |||
| BSS2300 | 150A BusBar w/Cover | $37.99 | |
| BSS2301 | 150A BusBar 10 x 8-32 | $32.99 | |
| BSS2302 | 150A BusBar 20 x 8-32 | $50.99 | |
| BSS2303 | 150A BusBar 4x1/4 Stud | $42.99 | |
| BSS2715 | cover busbar 10 clear | $9.99 | |
| BSS2716 | Cover for 2302 | $12.95 | |
Blue Sea DualBus Plus 150A Common BusBars
Secure, clear polycarbonate cover snaps on easily to meet ABYC insulation requirements.
- Combines negative and positive buses on one block
- Cover release buttons
- One-piece Stainless Steel Flange nuts ensure safe and secure connections
- Base Material Reinforced Polycarbonate
- Bus Material Tin-Plated Copper CDA 110 / UNS 11000
- Cover Material Clear Polycarbonate
- CE Certified
| p/n | 2722 | 2723 |
|---|---|---|
| Maximum Voltage | 48V DC / 300V AC | |
| Continuous Rating | 150A DC / 130A AC | |
| Number of Screw Terminals | 5 per bus x #10-32 | |
| Number of Terminal Studs | 2 per bus x 1/4"-20 Stud | 2 per bus x 5/16"-20 Stud |
| Terminal Type | #10-32 Screw | #10-32 Screw |
| Base Material | UL 94-V0 Rated, Glass Reinforced Thermoplastics | |
| Bus Material | Tin-Plated Copper CDA 110/ UNS11000 | |
| Cover Material | Clear Polycarbonate | |
| Mounting Screw | Accepts #10 (M5) Screws | |
| Screw Terminal Torque | 18 in-lb (2.03 Nm) | |
| Stud Terminal Torque | 60 in-lb (6.78 Nm) | 120 in-lb (13.56 Nm) |
| Weight | 0.66lb (0.3 kg) | 0.61lb (0.28 kg) |
| Blue Sea DualBus Plus 150A Common BusBars | |||
| BSS2722 | DualBus Plus 1/4 | $49.99 | |
| BSS2723 | DualBus Plus 5/16 | $49.99 | |
Blue Sea PowerBar 200A Common BusBars
Provides compact high-ampere busing with 3/8" terminal studs
- Terminal Type 3/8"-16 Stud
- Bus Material Tin-Plated Copper CDA 110/UNS11000
| p/n | 2019 |
|---|---|
| Maximum Voltage | 48V DC |
| Continuous Rating | 200A |
| Number of Terminal Studs | 2 |
| Terminal Type | 3/8"-16 Stud |
| Base Material | UL 94-V0 Rated, Glass Reinforced Thermoplastics |
| Bus Material | Tin-Plated Copper CDA 110/UNS11000 |
| Stud Torque | 100 in-lb (11.3 Nm) |
| Weight | 0.34lb (0.15 kg) |
| Blue Sea PowerBar 200A Common BusBars | |||
| BSS2019 | PowerBar BusBar 2x3/8 | $35.99 | |
Blue Sea MaxiBus 250A BusBar
Now with insert-moulded stainless steel studs and optional fully enclosed insulating base and cover.
Busbars are used to consolidate multiple wires or feed multiple circuits
- Insert molded stainless steel studs eliminate need for securing nut and allow high torquing for excellent electrical contact
- Raised bus provides easy access to multiple wires on a single screw or stud
- UL 94-V0 rated base material resists high heat
- Recessed mounting holes eliminate accidental shorts to aluminium and steel mounting surfaces
- Base Material - UL 94-V0
- Bus Material - Tin-Plated Copper CDA 110 / UNS 11000
| p/n | 2105 | 2126 | 2127 | 2128 |
|---|---|---|---|---|
| Maximum Voltage | 48V DC / 300V AC | |||
| Continuous Rating | 250A DC / AC | |||
| Number of Terminal Studs | 2 x 5/16"-18 | 6 x 5/16"-18 | 4 x 5/16"-18 | 2 x 5/16"-18 |
| Number of Screw Terminals | 12 x #10-24 | N/A | 6 x #10-24 | |
| Terminal Type | #10-24 Screw | 5/16"-18 Stud | #10-24 Screw | 5/16"-18 Stud |
| Base Material | UL 94-V0 Rated, Glass Reinforced Thermoplastics | |||
| Bus Material | Tin-Plated Copper CDA 110/ UNS11000 | |||
| Screw Terminal Torque | 23 in-lb (2.6 N·m) | N/A | 23 in-lb (2.6 N·m) | |
| Stud Terminal Torque | 132 in-lb (14.91 N·m) | |||
| Weight | 0.80lb (0.36 kg) | 1.00lb (0.45 kg) | 0.80lb (0.36 kg) | 0.80lb (0.36 kg) |
| Blue Sea MaxiBus 250A BusBar | |||
| BSS2105 | MaxiBus BusBar12x10-24 | $101.99 | |
| BSS2126 | MaxiBus BusBar 6x5/16 | $109.99 | |
| BSS2127 | MaxiBus BusBar 4x5/16 | $70.99 | |
| BSS2128 | MaxiBus BusBar6x10-24 | $68.99 | |
Blue Sea PowerBar 600A Common BusBar
Highest Amperage BusBars with 3/8" Terminal Studs
- Base Material Reinforced Polycarbonate
- Bus Material Tin-Plated Copper CDA 110/UNS11000
- CE Certified
| p/n | 2104 | 2107 |
|---|---|---|
| Maximum Voltage | 48V DC / 300V AC | |
| Continuous Rating | 600A DC / 545A AC | |
| Number of Terminal Studs | 4 x 3/8"-16 Stud | 8 x 3/8"-16 Stud |
| Terminal Type | 3/8"-16 Stud | |
| Base Material | UL 94-V0 Rated, Glass Reinforced Thermoplastics | |
| Bus Material | Tin-Plated Copper CDA 110/ UNS11000 | |
| Stud Terminal Torque | 140 in-lb (15.82 Nm) | |
| Weight | 1.75lb (0.79 kg) | 2.75lb (1.25 kg) |
| Blue Sea PowerBar 600A Common BusBar | |||
| BSS2104 | 600A PowerBar 4x3/8-16 | $174.50 | |
| BSS2107 | 600A Powerbar 8x3/8-16 | $243.99 | |
Blue Sea PowerBar 1000
Complex wiring systems require a single point to consolidate large and small conductors.
The PowerBar 1000 offers a 1,000 Amp busbar with various size studs and screws to connect conductors and fuse blocks.
The stepped tin plated pure electrical copper bus design offers two elevations for conductors which doubles the density of the wire loom compared to traditional bus bars.
Busbar and fuse block elevations match common fuse blocks allowing for multiple fuse block attachment, eliminating the need for connecting cables.
- 1,000 Amp busbar for large complex wiring systems
- Tin plated pure electrical copper for maximum conductivity
- Stepped bus design offers two elevations for conductors which doubles
- the density of the wire loom compared to traditional bus bars
- Busbar and fuse block elevations match common fuse blocks allowing for multiple fuse block attachment, eliminating the need for connecting cables
- One-piece serrated flange nuts ensure correct and secure connections
- Stainless steel 8-32 screws with captive lock washers for securing smaller gauge wires
- Busbar may be cut to a shorter length to accommodate constricted spaces
- Bi-directional busbar end caps allow the ganging of additional busbars
- Snap on insulating cover meets ABYC and USCG requirements and includes label recess
| Model | 1991 | 1993 |
|---|---|---|
| Maximum Voltage | 150V | 150V |
| Number of Terminal Studs | 12 | 12 |
| Continuous Rating | 1000A | 1000A |
| Bus Material | Tin-Plated Copper C11000 | Tin-Plated Copper C11000 |
| Mounting Holes | Accepts #10 (M5) Screws | Accepts #10 (M5) Screws |
| Terminal Stud Size | 3/8" - 16 | 5/16" - 18 |
| Blue Sea PowerBar 1000 | |||
| BSS1991 | Powerbar1000 12 x 3/8 | $319.50 | |
| BSS1993 | Powerbar1000 12 x 5/16 | $319.50 | |
Blue Sea MaxiBus Insulating Cover
-
Insulating cover with breakouts for superior electrical insulation
- Insulating cover meets ABYC insulations requirements
- Base Material Reinforced Nylon
- Cover Material Polycarbonate
P/N 2718 - Mounting holes provided for: PowerBar 600A Common BusBar, DualBus (x2), PowerPost Cable Connector, PowerPost Plus Cable Connector, Class T Fuse Block, and ANL Fuse Block
- All PowerPost Plus
- All Class T Fuse Blocks
- 2105 MaxiBus 250A BusBar - Two 5/16"-18 Studs and Twelve #10-24 Screws
- 2126 MaxiBus 250A BusBar - Six 5/16"-18 Studs
- 2104 PowerBar 600A BusBar - Four 3/8"-16 Studs
- 2701 DualBus 100A BusBar - 5 Circuit
- 2001 PowerPost - 1/4"-20 Stud
- 2002 PowerPost - 5/16"-18 Stud
- 2003 PowerPost - 3/8"-16 Stud
- 5503 ANL Fuse Block with Insulating Cover - 35 to 750A
P/N 2719 - Mounting holes provided for: 150A Common Busbars, DualBus, 285 Series Circuit Breakers (Surface Mount), PowerBar Common BusBar, and Dual PowerPost Cable Connectors
- All Dual PowerPost
- 2301 Common 150A BusBar - 10 Gang
- 2303 Common 150A BusBar - Four 1/4"-20 Studs
- 2702 DualBus 100A BusBar - 10 Circuit
- 285-Series Circuit Breaker - Surface Mount 25A - 150A
- 2019 PowerBar Dual BusBar - Two 3/8"-16 Stud and Insulators
- 2020 PowerBar Dual BusBar - Two 3/8"-16 Studs
- 2127 MaxiBus 250A BusBar - Four 5/16"-18 Studs
- 2128 MaxiBus 250A BusBar - Two 5/16"-18 Studs and Six #10-24 Screws
| Blue Sea MaxiBus Insulating Cover | |||
| BSS2718 | Cover for 2105 & 2126 | $51.99 | |
| BSS2719 | Cover for 2127 & 2128 | $43.99 | |
Blue Sea PowerPost Connectors
Blue Sea PowerPost & Mini PowerPost Connectors
Insulated single stainless steel stud terminates multiple large conductors
- Connects high amperage cables securely
- Base Material is PBT UL94 V0 (Reinforced Thermoplastic)
- Includes insulator (red)
| p/n | 2002 | 2003 | 2010 |
|---|---|---|---|
| Maximum Voltage | 48V DC | ||
| Continuous Rating | Not rated—amperage flows between terminals stacked on post and is | ||
| Stud Size | 5/16"-18 | 3/8"-16 x 7/8" | #10-32 x 5/8" |
| Base Material | Reinforced Thermoplasti | ||
| Weight | 0.24lb (0.11 kg) | 0.27lb (0.12 kg) | 0.06lb (0.03 kg) |
*The ABYC recommends no more than 4 terminals per stud
| Blue Sea PowerPost & Mini PowerPost Connectors | |||
| BSS2002 | PowerPost 5/16 | $20.99 | |
| BSS2003 | PowerPost 3/8 | $20.99 | |
| BSS2010 | Mini PowerPost #10-32 | $13.99 | |
Blue Sea PowerPost Plus Connectors
Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit
- 150 Ampere bus allows small wire connections at high amperage cable connections
- Connects high amperage cables securely
- Base Material is Black Nylon 8231 GHS (Reinforced Thermoplastic)
- Bus Material Tin-Plated Copper
- Includes insulator (red)
| p/n | 2102 | 2103 |
|---|---|---|
| Maximum Voltage | 48V DC | |
| Amperage | 150A DC | |
| Stud Size | 5/16"-18 x 3/4" | 3/8"-16 x 3/4" |
| Screw Size | #8-32 | |
| Base Material | Reinforced Thermoplastic | |
| Bus Material | Tin-Plated Copper C11000 | |
| Weight | 0.30lb (0.14 kg) | 0.34lb (0.15 kg) |
| Blue Sea PowerPost Plus Connectors | |||
| BSS2102 | PowerPost Plus 5/16 | $37.99 | |
| BSS2103 | PowerPost Plus 3/8 | $37.99 | |
Blue Sea Dual PowerPost Connectors
Provides a termination point for extending the length of outboard harnesses or other conductors
- Designed for outboard engine installation when factory cables need to be extended
- Designed for connecting high amp conductors
- Includes one black and one red insulator
- One-piece serrated flange nuts ensure correct and secure connections
| p/n | 2016 | 2017 |
|---|---|---|
| Maximum Voltage | 48V DC | |
| Continuous Rating | Not rated—amperage flows between terminals stacked on post and is | |
| Stud Size | 5/16"-18 | 3/8"-16 |
| Stud Torque | 120 in-lb (13.56 Nm) | 140 in-lb (15.82 Nm) |
| Screw Size | #8-32 | |
| Base Material | Reinforced Thermoplastic | |
| Bus Material | Tin-Plated Copper C11000 | |
| Weight | 0.32lb (0.15 kg) | 0.36lb (0.16 kg) |
| Blue Sea Dual PowerPost Connectors | |||
| BSS2016 | Dual PowerPost 2x5/16 | $32.99 | |
| BSS2017 | Dual PowerPost 2x3/8 | $36.99 | |
Blue Sea Terminal Feed Through Connectors
Eliminates chafe and provides strain relief when passing high current through hulls, decks and bulkheads
- Perfect for passing high current cables through hulls, decks and bulkheads
- Large cables passed through holes are subject to chafing even when protective grommeting is used. Terminal Feed Through Connectors eliminate chafing and provide excellent strain relief for the cable
- Large size terminals have a mounting face that can be gasketed or bedded to provide a water tight installation
- Rated IP66 — withstands water from heavy seas
- Base Material Reinforced Thermoplastic
- Stud Material Tin-Plated Copper Alloy
- Recommended Torque 100 in-lb (11.3 Nm)
| p/n | 2201 | 2202 | 2203 | 2204 |
|---|---|---|---|---|
| Amperage | 250A DC | |||
| Color | Black | Red | Black | Red |
| Maximum Voltage | 48V DC | |||
| Stud Size | 5/16"-18 | 3/8"-16 | ||
| Base Material | Reinforced Thermoplastic | |||
| Recommended Torque | 100 in-lb (11.3 N·m) | |||
| Stud Material | Tin-Plated Copper Alloy | |||
| Weight | 0.30lb (0.14 kg) | |||
| Blue Sea Terminal Feed Through Connectors | |||
| BSS2201 | Term 5/16-18 Black | $33.99 | |
| BSS2202 | Term 5/16-18 Red | $33.99 | |
| BSS2203 | Term 3/8-16 Black | $37.99 | |
| BSS2204 | Term 3/8-16 Red | $37.99 | |
Bussmann Stud Type Junction Blocks
Single Stud M6 Junction Block
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
| p/n | PPBS06SW | PPRS06SW |
|---|---|---|
| Colour | Black | Red |
| Maximum Voltage | 48V DC | |
| Maximum Amperage | Not rated—amperage flows between terminals stacked on post and is | |
| Stud Size | M6 | |
| Body Material | Nylon, Glass Fibre Reinforced | |
| Studs & Hardware | Stainless Steel | |
| Single Stud M6 Junction Block | |||
| PPBS06SW | PP7 POST 6MM BLACK | $11.50 | |
| PPRS06SW | PP18 POST 6MM RED | $11.50 | |
Single Stud M8 Junction Block
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
| p/n | PPBS08SW | PPRS08SW |
|---|---|---|
| Colour | Black | Red |
| Maximum Voltage | 48V DC | |
| Maximum Amperage | Not rated—amperage flows between terminals stacked on post and is | |
| Stud Size | M8 | |
| Body Material | Nylon, Glass Fibre Reinforced | |
| Studs & Hardware | Stainless Steel | |
| Single Stud M8 Junction Block | |||
| PPBS08SW | PP8 POST 8MM BLACK | $12.99 | |
| PPRS08SW | PP19 POST 8MM RED | $12.99 | |
Single Stud M10 Junction Block
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
| p/n | PPBS10SW | PPRS10SW |
|---|---|---|
| Colour | Black | Red |
| Maximum Voltage | 48V DC | |
| Maximum Amperage | Not rated—amperage flows between terminals stacked on post and is | |
| Stud Size | M10 | |
| Body Material | Nylon, Glass Fibre Reinforced | |
| Studs & Hardware | Stainless Steel | |
| Single Stud M10 Junction Block | |||
| PPBS10SW | PP9 POST 10MM BLACK | $15.99 | |
| PPRS10SW | PP20 POST 10MM RED | $15.37 | |
Single Stud 5/16" Junction Block
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
| p/n | PPBS516SW | PPRS516SW |
|---|---|---|
| Colour | Black | Red |
| Maximum Voltage | 48V DC | |
| Maximum Amperage | Not rated—amperage flows between terminals stacked on post and is | |
| Stud Size | 5/16"-18 | |
| Body Material | Nylon, Glass Fibre Reinforced | |
| Studs & Hardware | Stainless Steel | |
| Single Stud 5/16 Junction Block | |||
| PPBS516SW | PP11 POST 5/16 BLACK | $12.49 | |
| PPRS516SW | PP22 POST 5/16 RED | $12.49 | |
Single Stud 3/8" Junction Block
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
| p/n | PPBS38SW | PPRS38SW |
|---|---|---|
| Colour | Black | Red |
| Maximum Voltage | 48V DC | |
| Maximum Amperage | Not rated—amperage flows between terminals stacked on post and is | |
| Stud Size | 3/8"-16 | |
| Body Material | Nylon, Glass Fibre Reinforced | |
| Studs & Hardware | Stainless Steel | |
| Single Stud 3/8 Junction Block | |||
| PPBS38SW | PP10 POST 3/8 BLACK | $13.76 | |
| PPRS38SW | PP21 POST 3/8 RED | $13.76 | |
Double Stud M6 Junction Block
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
| p/n | PPBD06SW | PPRD06SW |
|---|---|---|
| Colour | Black | Red |
| Maximum Voltage | 48V DC | |
| Maximum Amperage | Not rated—amperage flows between terminals stacked on post and is | |
| Stud Size | 2 x M6 | |
| Body Material | Nylon, Glass Fibre Reinforced | |
| Studs & Hardware | Stainless Steel | |
| Double Stud M6 Junction Block | |||
| PPBD06LSW | PP1 DOUBLE BK LINK | $15.37 | |
| PPRD06LSW | PP12 DOUBLE RED LINK | $15.37 | |
Double Stud M8 Junction Block
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
| p/n | PPBD08SW | PPRD08SW |
|---|---|---|
| Colour | Black | Red |
| Maximum Voltage | 48V DC | |
| Maximum Amperage | Not rated—amperage flows between terminals stacked on post and is | |
| Stud Size | 2 x M8 | |
| Body Material | Nylon, Glass Fibre Reinforced | |
| Studs & Hardware | Stainless Steel | |
| Double Stud M8 Junction Block | |||
| PPBD08LSW | PP3 DOUBLE BK LINK | $16.12 | |
| PPRD08LSW | PP14 DOUBLE RED LINK | $16.12 | |
Double Stud M6 Junction Block with Link
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
| p/n | PPBD06LSW | PPRD06LSW |
|---|---|---|
| Colour | Black | Red |
| Maximum Voltage | 48V DC | |
| Maximum Amperage | Includes Removable Link rated to 80A Max. | |
| Stud Size | 2 x M6 | |
| Body Material | Nylon, Glass Fibre Reinforced | |
| Studs & Hardware | Stainless Steel | |
| Double Stud M6 Junction Block with Link | |||
| PPBD06LSW | PP1 DOUBLE BK LINK | $15.37 | |
| PPRD06LSW | PP12 DOUBLE RED LINK | $15.37 | |
Double Stud M8 Junction Block with Link
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
| p/n | PPBD08LSW | PPRD08LSW |
|---|---|---|
| Colour | Black | Red |
| Maximum Voltage | 48V DC | |
| Maximum Amperage | Includes Removable Link rated to 80A Max. | |
| Stud Size | 2 x M8 | |
| Body Material | Nylon, Glass Fibre Reinforced | |
| Studs & Hardware | Stainless Steel | |
| Double Stud M8 Junction Block with Link | |||
| PPBD08LSW | PP3 DOUBLE BK LINK | $16.12 | |
| PPRD08LSW | PP14 DOUBLE RED LINK | $16.12 | |
Double Stud M8 Junction Block with Barrier
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
| p/n | PPBD08BSW |
|---|---|
| Colour | Black |
| Maximum Voltage | 48V DC |
| Maximum Amperage | Not rated—amperage flows between terminals stacked on post and is |
| Stud Size | 2 x M8 |
| Body Material | Nylon, Glass Fibre Reinforced |
| Studs & Hardware | Stainless Steel |
| Double Stud M8 Junction Block with Barrier | |||
| PPBD08BSW | PP2 DOUBLE BK BAR | $16.12 | |
Feed Through Connector 1/4-20 Stud
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
Feed-Through blocks are designed to be used on a firewall or panel.
| p/n | PPBS06SW | PPRS06SW |
|---|---|---|
| Colour | Black | Red |
| Maximum Voltage | 48V DC | |
| Maximum Amperage | 100A DC | |
| Stud Size | 1/4"-20 | |
| Body Material | Nylon, Glass Fibre Reinforced | |
| Studs & Hardware | Stainless Steel | |
| Feed Through Connector 1/4-20 Stud | |||
| PPBF14SW | PP5 THROU POST BLACK | $14.18 | |
| PPRF14SW | PP16 THROU POST RED | $14.18 | |
Feed Through Connector 3/8-16 Stud
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
Feed-Through blocks are designed to be used on a firewall or panel.
| p/n | PPBS06SW | PPRS06SW |
|---|---|---|
| Colour | Black | Red |
| Maximum Voltage | 48V DC | |
| Maximum Amperage | 250A DC | |
| Stud Size | 3/8"-16 | |
| Body Material | Nylon, Glass Fibre Reinforced | |
| Studs & Hardware | Stainless Steel | |
| Feed Through Connector 3/8-16 Stud | |||
| PPBF38SW | PP6 THROU POST BLACK | $18.56 | |
| PPRF38SW | PP17 THROU POST RED | $18.56 | |
Double Stud Junction Block
Heavy-duty ground or power connection points for DC circuits.
Compact profile with insulated base.
Ideal for creating a centralized power distribution or grounding point.
| p/n | PPBD600V |
|---|---|
| Colour | Black |
| Amp & Voltage Rating | (CSA): 30A at 600V |
| Stud Size | 2 x #10-32 |
| Body Material | Black Thermoplastic |
| Studs & Hardware | Yellow Zinc Plated Brass |
| Double Stud Junction Block | |||
| PPBD600V | PP23 Double Bar 600v | $29.99 | |
Narva Terminal Strips
Manufactured from polyamine (nylon), Narva connector strips are capable of operating in temperatures up to 105°C making them ideal for automotive use.
56280 - Strip of 12 terminal blocks rated to 20A, manufactured of polyamide (nylon), with a maximum operating temperature of 105°C
56281 - Strip of 12 terminal blocks rated to 30A, manufactured of polyamide (nylon), with a maximum operating temperature of 105°C
56282 - Strip of 12 terminal blocks rated to 35A, manufactured of polyamide (nylon), with a maximum operating temperature of 105°C
56283 - Strip of 12 terminal blocks rated to 50A, manufactured of polyamide (nylon), with a maximum operating temperature of 105°C
| p/n | 56280BL | 56281BL | 56282BL | 56283BL |
|---|---|---|---|---|
| Colour | White | |||
| Amp Rating | 20A | 30A | 35A | 50A |
| Cable Size | 1.5mm2 | 2.5mm2 | 5.5mm2 | 8mm2 |
| Body Material | polyamide (nylon) | |||
| Maximum Operating Temperature | 105°C | |||
| NAR56280BL | 12 x 20A terminal | $8.99 | |
| NAR56281BL | 12 x 30A terminal | $9.99 | |
| NAR56282BL | 12 x 35A terminal | $10.99 | |
| NAR56283BL | 12 x 50A terminal | $12.99 | |
Source: https://www.12volt.com.au/General%20Htmls/webcat2003/cableacc.html
0 Response to "Isolated Ground Stud M6 Feed Through"
Enregistrer un commentaire